EasyCamera for Foscam is an Android application for remote surveillance and control with your smartphone or tablet. App is designed for HD-cameras Foscam

The app supports the following camera models:
C1 C1Lite C2 R2 FI9800P FI9801W FI9802W FI9803EP FI9803P FI9804P FI9804W FI9805E FI9805P FI9805W FI9816P FI9818W FI9820W FI9821EP FI9821P FI9821W FI9826P FI9826W FI9828P FI9828W FI9831P FI9831W FI9851P FI9853EP FI9900EP FI9900P FI9903P FosBaby

The current version of the application is not designed for MJPEG-cameras Foscam such as FI8918W and others in the series

App also supports some Foscam clones
The list of supported cameras:
Ivue IV2405P
Ivue IV8513PZ
Ivue IV5511E
Ivue IV2503PZ
LUPUSNET LE200

App features:
- View up to 4 cameras on the screen simultaneously
- Easy management of cameras
- Motion detection
- Infra Led on/off/auto
- Video Flip
- Video Mirror
- PTZ control (only supported by cameras with PTZ)
- PTZ presets
- Digital Zoom
- Brightness contrast hue saturation and sharpness adjusting
- Two-way audio - listen and talk (if "H264" is selected as video transfer protocol). Press and hold button with microphone icon to transmit audio to the camera. When you talk you can't listen audio from the camera to avoid increasing noise level. Release button when stop talking
- Show/hide control buttons for full screen view
- Displays camera's current settings
- Snapshot to SD card
- Video recording to SD card (if "H264" is selected as video transfer protocol)
- SSL (HTTPS protocol) support (if "H264" is selected as video transfer protocol). Before using SSL connection please make sure that you have configured port forwarding for port 443 on your router (default HTTPS port for Foscam)
- Darkening video/default video settings. If you have access to camera's administrator account you can set to zero values of contrast and saturation pressing only one button and camera's image will be black. Users with operator's accounts don't have access to change these settings
- Support for two video transfer protocols - sequence of images (JPEG Snapshots) and video stream based on codec H264
- If "JPEG Snapshots" is selected as the video transfer protocol you can set delay for sequence of images. Default - zero seconds
- If "H264" is selected as the video transfer protocol you can select one of two video modes - Sub Stream (in case of slow Internet connection worse video quality) or Main Stream (in case of fast Internet connection better video quality). Default - Main Stream
- Supports up to 10 cameras
- Can be used as baby monitor

Please note that current version of the app does not support P2P connection