When adjusting the brightness of the backlight you can arbitrarily set the maximum and minimum of the brightness and switch with shake. Adjust with LED brightness without using filter.


1. The maximum and minimum brightness can be set arbitrarily when the backlight brightness is automatically adjusted. (Android 4.4+ or Rooted 4.3 or lower only)
2. Save up to three settings and switch with shake. (Android 4.4+ or Rooted 4.3 or lower)
3. You can set the backlight brightness to be darker than the OS minimumize setting. (Rooted Android 4.3 or lower only)
4. For models with hard keys you can adjust the key backlight. (Rooted Android 4.3 or lower only)
5. Because filters are not used power saving is achieved if the luminance is lowered. Also the capture will not get dark.


1.
Please set the notification setting of Superuser etc to off.

2.
Start BKlightCtl.

3.
Let's move the seek bar of "SCR brightness (Min)". The screen darkens according to the value of the bar.
The brightness set here becomes the lowest brightness.
If you darken the setting too much you may not be able to see the screen so please be careful!.
For safety reasons we can not set it to less than "8".

4.
BKlightCtl does not correspond to that model if it does not become dark even if "SCR brightness (Min)" is changed.

5.
Next adjust "SCR brightness (Max)". The brightness set here becomes maximum brightness.
It can not be smaller than "SCR brightness (Min)".
Depending on the model 255 is not the maximum brightness. (It does not become brighter than a certain value)
For example if the brightness of 144 or more does not change set it to 144.

6.
In this state the setting is not saved and the brightness adjustment is not working.
Please check "Execute" and press "Save & Set" button.
A display is added to the notification bar and automatic adjustment is started within the specified brightness range.

7.
If you want to stop the operation uncheck "Execute" and press the "Save & Set" button.

8.
It can be automatically started with the menu - "Detail settings" - "Auto start on boot".
Please do not check "Auto start on boot" at the first stage.If problems occur turn the power off and back on.


"Button luminance threshold value" is the threshold value of the surrounding brightness.
Change the key backlight to "KBD brightness" when the surrounding brightness is brighter than the "Lux threshhold(KBD)" setting or to "KBD brightness (Night)" when it is dark.
If you do not use key backlight please set "Lux threshhold(KBD)" to zero.


· It is possible to change the brightness by inputting the following shell command with root authority.
[Screen]
am startservice -n com.jp.ssipa.bklightctl / .MyService --es SERVICE_STATUS TEST_K - ei TESTVALUE {0-255}
[Key]
am startservice -n com.jp.ssipa.bklightctl / .MyService --es SERVICE_STATUS TEST_S - ei TESTVALUE {0-255}

· If you have any request please comment on Google Plain.