Take VR streaming to the next level with
Radeon™ ReLive for VR! Supporting select* Radeon™ VR Ready Premium
graphics cards Radeon™ ReLive VR app enables high quality wireless
PC VR gaming on your standalone Daydream headset.
GET STARTED QUICKLY
Simply launch SteamVR™ connect via the Radeon™ ReLive VR app & open a game to start playing.
FEATURES
- Radeon™ ReLive streaming pipeline built specifically for low latency VR
- Wireless VR made possible through positional tracking of HTC Vive Focus and Radeon™ GPU headset optimizations
- Easily start gaming with third party Bluetooth controller compatibility**
- Stream at an immersive 1440x1440p resolution
INSTRUCTIONS
- Steam and SteamVR need to be installed in your PC
- Make sure your PC is connected to a 5GHz (802.11ac) router or a wireless access point with an Ethernet cable (Cat-5e or Cat-6 recommended)
- Enable Remote Play in the Radeon™ Settings -> ReLive -> Game & VR Streaming tab and then flip the SteamVR Integration switch to Enabled to enable Radeon™ Relive VR.
- Allow incoming network traffic on Windows Firewall if prompted.
- Run SteamVR on your PC.
- Install the Relive VR app on your Daydream device
- Make sure your Daydream device is connected to the same router/AP as your PC running SteamVR. Use the 5GHz SSID (usually has 5G or 5GHz or AC in its name for most routers) – note that 2.4GHz networks (802.11n or earlier) are not recommended for a good wireless VR experience.
- Run the Relive VR app. It will find your PC running SteamVR and connect to it automatically.
Compatible with AMD Radeon™ RX 470 RX 570 RX 480 RX 580 RX 590 & RX Vega series products & supports Windows® 10. Recommended experience on Radeon™ RX Vega series graphics cards. Controllers must be compatible with selected game and headset please consult vendor for compatibility information.
**PC game compatibility depends on headset capability. Please see www.AMD.com/ReLive
GET STARTED QUICKLY
Simply launch SteamVR™ connect via the Radeon™ ReLive VR app & open a game to start playing.
FEATURES
- Radeon™ ReLive streaming pipeline built specifically for low latency VR
- Wireless VR made possible through positional tracking of HTC Vive Focus and Radeon™ GPU headset optimizations
- Easily start gaming with third party Bluetooth controller compatibility**
- Stream at an immersive 1440x1440p resolution
INSTRUCTIONS
- Steam and SteamVR need to be installed in your PC
- Make sure your PC is connected to a 5GHz (802.11ac) router or a wireless access point with an Ethernet cable (Cat-5e or Cat-6 recommended)
- Enable Remote Play in the Radeon™ Settings -> ReLive -> Game & VR Streaming tab and then flip the SteamVR Integration switch to Enabled to enable Radeon™ Relive VR.
- Allow incoming network traffic on Windows Firewall if prompted.
- Run SteamVR on your PC.
- Install the Relive VR app on your Daydream device
- Make sure your Daydream device is connected to the same router/AP as your PC running SteamVR. Use the 5GHz SSID (usually has 5G or 5GHz or AC in its name for most routers) – note that 2.4GHz networks (802.11n or earlier) are not recommended for a good wireless VR experience.
- Run the Relive VR app. It will find your PC running SteamVR and connect to it automatically.
Compatible with AMD Radeon™ RX 470 RX 570 RX 480 RX 580 RX 590 & RX Vega series products & supports Windows® 10. Recommended experience on Radeon™ RX Vega series graphics cards. Controllers must be compatible with selected game and headset please consult vendor for compatibility information.
**PC game compatibility depends on headset capability. Please see www.AMD.com/ReLive
Show More >