What is switch-it! ?

switch-it! is a simple configurator monitoring and controller app for your D.I.Y ESP8266 IoT device. You can use switch-it! for real-time monitoring and controling for example relay and motion sensor through WebSocket and MQTT. All configuration can be done via the app including Wi-Fi and MQTT setup so there is no need to hardcode anything at all.

Features

- One Time Binding the app will store connected device locally so you don't have to manually enter address of the ESP everytime you wan't to access it.
- 3 Device Registration bind up to 3 ESP8266 device for free.
- MQTT support control and monitoring through MQTT. (Currently we only support and tested MQTT implementation with HiveMQ broker).
- OTA Firmware Update update device firmware through webserver.
- Auto Discovery with mDNS service the app will automatically look for configured ESP within the same local network.
- No Coding Required we have provided a ready to flash firmware binary file. All you need to do is to configure WiFi connection and bind it with the app.
- State Persistance the board will revert back to the state it is in before a restart or power out.
- Pull to Refresh for easy reconnection to all bonded ESP board.
- Board Reset swipe card to unbind the ESP board and reset it to Wi-Fi configuration mode.

Device List
- General I/O
- Motion Sensor

Setup Guide

Setup wiring guide and firmware can be found in our GitHub Repository invoklab/switch-it GitHub Repository .

Got feedback? We'd love to hear it!

You can send us your feedback or any inquiries to
[email protected]